The conventional rotor die casting machine requires about 3-5
operators for one machine. However, for our rotor die casting
machine, one people can take care of more than one machines. It
only takes one day for green hands becoming practician. It greatly
reduced labor cost.The tooling change is also fast. it takes about
10min to change mould.
Unlike the conventional die casting machine, our machine doesn't
need asbestine cup to keep the temperature and demould. The
adpotion of automatic solid lubricating system and demould oil
adding system makes the whole production smokeless , tasteless ,
pollution free and clean.
it adpots a C type structure. During production, there’s no need
for operator to work under the projection area. Meanwhile, operator
does not need to handling the heavy tooling which might occur body
injury, and the machine has aluminium anti spatter design to
prevent the aluminium liquid from spraying and cause injury.
This armature die casting machine is consisted of main machine and
hydraulic electronic control system .
1.Main cylinder mould locking system
2. injection system
3. residual aluminum(sprue)pushing and conveying mechanism
4. automatic demould oil spraying
5.lower mould cooling system
6. lubricating system of puncher pin and molten aluminum container
7.Lower mould rotation system
8. Mould assembly system
9.Hydraulic system and electronic control system
10. Aluminum liquid loading system
12. Loading system
Click below picutre to view the vidio.