Semi Auto Double Flyer Armature Winding Machine Reliable , PLC
1. This machine has two winding flyers.
2. It can automatically winding.
3. This machine is suitable for wire diameter range 0.08-1.08mm
4. This machine is suitable for both riser and hook type
Semi-auto Double flyer Armature Winding Machine is especially
designed for winding even slot armatures. It’s suitable for hook or
riser type commutator armature. It is widely used in many armatures
field like automobile motor, motorcycle motor, house appliances
series excited motor, power tool motor and various kinds of PMDC
micro motor. It’s an economic, fast and reliable specialized
1. This winding machine adapts double flyers structure, 1set 1KW
servo motor drive the two flyers rotation, and 400W indexing servo
motor. During working, the armature is clamped tightly by two nos
winding tooling and clamping device. When flyers are running, wire
goes through the wire holder, tension device then enters hollow
spindle, comes out from wire sliding wheel, then the wire slides
into the armature slot through flyer wire guiding wheel. After this
step, put armature into the slot to do winding.
2. This machine adapts servo system to do winding. Meanwhile,
machine action is controlled by true color human-machine PLC
controller; armature indexing is controlled by big power stepping
motor; servo speed is controlled by double flyers rotation speed.
Moreover, this machine has other functions, such as slow increasing
speed when starting, Max. speed limit, brake time, CW &CCW
rotation, counting pre-set, etc. With complete function and
reliable running, this machine is convenient for operation.
3. The machine fixture is controlled by pneumatic cylinder, high
performance with low cost. It’s equipped with working plate, to
operating more convenient.
4. The machine adapts PLC system pulse counting signal, whose
correctness is 100%.
Main technical data:
1. Input voltage: 220V±10%
2. Rated frequency: 50Hz
3. Motor power: 2.0KW 1500r/min
4. Spindle speed: 0～1500r/min
5. Center height: 160mm(it can be customized.)
6. Max.armature OD: f60mm(it can be customized.)
7. Pre-setting turn number range: 0～32767
8. Display: true color touch screen
9. Speed adjustment: controlled by touch screen
10. Starting method: manual switch
11. Max. speed: 4000r/min
12. Acceleration time: settable freely(default value is 100-500MS)
Machine working of this armature winding machine, click picture to