Double Station Armature Electrical Motor Winding Machine / Small
1. This armature Winding Machinemachine is suitable for small armature with 3-5 slots.
2. The coil winder has two working stations so that it can wind 2
armatures at same time.
3, Machine is controlled by PLC.
This kind of Two Station Armature Winding Machine is used for the small armature with 3~5 slots. There are 2 working
stations, 2 armature can be winded at same time. Machine is
controlled by PLC.
Machine main technical parameter
220VAC ±10% / 50Hz
Main motor power
Max rotation speed of main spindle
No. of station
Wire diameter range
Armature slots range
3 slots or 5 slots
Armature O.D. range
Stack length range
Armature spindle range
Information needed for Armature Winding Machine inquiry
It will be better if customer could send us detailed drawing
including below information.
1. Rotor lamination drawing
2. Rotor assemble drawing
3. Rotor stack drawing
4. Rotor winding diagram drawing: with rotor wire diameter and turn
5. Commutator drawing
6. Required productivity
7. Other technical requirement
If possible, it will be better if customer can send us samples.
This machine has two working stations, and it can wind two
armatures at same times. So it saves more time.
Armature after winding by this machine